收藏本站
B32921C/D ... B32928C/D
X2 / 305 V AC
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature T max . Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 ° C
Temperature inside the capacitor should not exceed the following limits:
MKP/MFP 110 ° C
MKT 160 ° C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-
ter the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤ 10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 ° C in the preheater phase
rapid cooling after soldering
Application note for X1 / X2 EMI capacitors
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 22
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
B32928E3256K CAP FILM 25UF 310VAC RADIAL
B32934A3474K CAP FILM 0.47UF 305VAC RADIAL
B37872R5102M041 CAP ARRAY 4CH 1000PF 50V 1206
B37931K9224K60 CAP CER 0.22UF 16V 10% X7R 0603
B37941K9474K60 CAP CER 0.47UF 16V 10% X7R 0805
B37947K9682J62 CAP CER 6800PF 16V 5% NP0 0805
B37985N5155M054 CAP CER 1.5UF 50V 20% Z5U RADIAL
B37987M1154K054 CAP CER 0.15UF 100V 10% RADIAL
相关代理商/技术参数
B32926C3106M000 制造商:EPCOS 功能描述:Cap Film 10uF 305VAC PP 20% 41.5 X 28 X 42.5mm RDL 37.5mm Bulk
B32926C3106M189 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors EMI Suppression Capacitors (MKP)
B32926C3106M26 制造商:TDK Epcos 功能描述:
B32926C3106M289 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors EMI Suppression Capacitors (MKP)
B32926C3106MM2 制造商:TDK-EPC 功能描述:B32926 Series 305 V 10 uF 20 % LS = 37.5 mm Radial Suppression Film Cap
B32926C3156M 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors
B32926C3156M000 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors
B32926C3225 制造商:EPCOS 制造商全称:EPCOS 功能描述:Film Capacitors